RSS
Menampilkan postingan yang diurutkan menurut relevansi untuk kueri Black Looks. Urutkan menurut tanggal Tampilkan semua postingan
Menampilkan postingan yang diurutkan menurut relevansi untuk kueri Black Looks. Urutkan menurut tanggal Tampilkan semua postingan

The Black Hair in My Portrait is like a Dark Splodge

Painting black hair for the first time may compel the novice into reaching for the black tube of oil paint and illustrating each strand with a fine line. The resultant portrait may appear to have had a transplant of black wires emanating from the scalp. How can the artist paint black hair convincingly?

Problems with Painting Black Hair in Portraits

Pigments for Dark Hair
Rachel Shirley
 Before making changes, the portrait artist needs to address the mistakes when painting dark hair. The following malpractices are often to blame for dark hair in portraits that look artificial or unconvincing.
  • Using only black pigment to illustrate dark hair and then expressing highlights by using white.
  • Leaving tonal bands in the hair from crown to tip due to poor blending, suggesting a corrugated texture rather than that of hair.
  • Over-blending the tonal divisions of the hair until the hair looks more like one solid object rather than one of separate strands.
  • Not rendering shadows beneath hair, such as around the brow and temples, making the hair appear transplanted onto the face and leaving the portrait painting incoherent.
  • Using too much blue in the highlights of dark hair, making it appear artificial.
How to Paint Dark Hair in Portraits.

The secrets to painting convincing dark hair in portraits can be found when adhering to the following practices and ideas.

Many colours can be found in black hair on close inspection. Depending upon the lighting conditions and the angle at which the hair is lit, I have found the following colours:

Cobalt, violet, mauve, smoky grey, midnight blue, chestnut brown, sepia and amber.
  • Not every black hair is the same black. Some blacks are slightly bluer or browner than others. It is important to look closely and observe the colour shifts within each head of black hair, be it African, Chinese, Asian or even Caucasian.
  • I would bin the black paint or reserve it only for the pupils of the eyes. I’d rather mix my own blacks from existing pigments. Rich, more interesting blacks can be obtained by mixing all three primary colours together and in varying quantities. More on this below.
  • The highlights in black hair are often not simply blue or grey but other colours or variants on these colours.
Pigments for Black Hair

Different blacks exist in hair, from warm blacks to cool blacks. The following oil painting mixes will result in a diversity of blacks that may surprise the artist.
  • Burnt sienna and ultramarine will result in a soft, smoky black.
  • Permanent rose, pthalo blue and burnt umber will result in a sharp but warm black.
  • Burnt umber and pthalo blue will result in a cold, dark black.
  • Burnt sienna and pthalo blue will result in a coffee-tinged black.
  • Permanent rose, ultramarine and burnt umber will result in a violet black.
It is also important to observe the texture of black hair, which is often sleek but can be frizzy. Blend highlights into the next tonal gradation by using a soft clean sable. Oil painting glazes can be used to achieve a high finish. This entails applying a series of thin paint glazes, the upper glaze providing a smoother finish to the last. Observe also the contours of black hair which can be wavy or straight. Move the brush marks in the direction of the hair growth.

How to Paint Ethnic Hair

Illustrating shadows beneath the hair, as cast on the brow, cheeks or temples will make the hair look as though it belongs to the face rather than cut-out and stuck on. Black hair is after all the ultimate in tone, as can be seen on afro-Caribbean hair, African hair and Asian hair.

Kolinsky Red Sable Oil Round 1
click to buy from Amazon
Pay attention also to any flyaway strands from the main body of the hair. This will provide the outline to the portrait. I use a fine sable to illustrate selected strands of hair (not every hair). Some of the strands may be paler than others, not merely black. Highlights may catch some and provide focal points for the painting. It is all about close observation.

Advice Relating to Figure Painting

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

My Moonlit Landscape Painting Looks Dull

In an attempt to paint an evening landscape, the artist may automatically use lots of black paint. A little brown or grey may be included to provide variations to the dark colour, resulting in dirty monochromes that fails to convince. What colours should the artist use to paint a dark landscape?

The Problems with Painting Moonlight

What Colour is Night?
Rachel Shirley
The artist painting a moonlit landscape may experience a dilemma between what the brain knows about the scene and what is seen; the objects are bright in colour, and yet they appear subdued.

This may lead the artist to add black to all the colours normally seen in daylight, but this could result in dirty colours. In order to paint a convincing and atmospheric night time landscape, the following faulty practices need addressing:

  • Adding black to all the colours normally seen in a landscape. For instance, mixing green with black to render a dark meadow or mixing blue with black to express a seascape set at night.
  • Illustrating all objects in a moonlit landscape as being lighter on one side than the other.
  • Delineating silhouettes with the same black and using it in an illustrative way, such as painting branches or chimney pots, resulting in a painting that lacks depth.
  • Painting the moon merely white and without any variations in tone.
  • Flecking white dots over the night sky to express stars.
What Colour is Night?

Colours cannot be detected at night time, causing objects to appear monochromatic. But any light that shine upon an object will reveal its colour. This means that a partially-lit landscape, such as one set in the evening or by streetlight will consist of two colour palettes: monochrome and full colour. The degree to which the object is illuminated will affect how colourful it will appear. This means that an object lit under subtle lighting, will have soft colours.

But even a landscape painting illuminated by moonlight will have more colours than just black and white. In fact, I would use black sparingly. Close observation will reveal a multitude of neutrals, violets and earth colours that make up a moonlit landscape. The following pigments in any combination and in various amounts can be used for monochromes:

Ultramarine, pthalo blue, burnt sienna, burnt umber, permanent rose and varying amounts of white.

The Colour of Darks

A landscape under moonlight often contains a lot of blue, and sometimes violet. Mixing ultramarine and permanent rose with a little white will result in rich violets often seen on clear nights. Mixing pthalo blue and burnt umber with a little white will result in a bluish neutral colour often seen on moonlit snow. Rich darks, such as those found in deep shadows can be achieved by mixing pthalo blue with burnt umber, or ultramarine with burnt sienna. Darks also have different colour temperatures, some being warmer than others. Using contrasting darks will add richness to a moonlit painting.

How to Paint a Dark Landscape

It helps to paint dark to light when rendering a landscape set at night. This means applying a thin wash of neutral or grey over the art board prior to painting. This will help set the tones of the night time landscape, for painting straight onto white will give a misleading impression of the paints’ tonal values. Starting with the mid tones will help the artist accurately measure one tone against the other, which is what painting a moonlit scene is all about.

How to Paint the Moon

Close observation will reveal that the moon is not just white, it can be eggshell, china blue or even pink, depending upon the atmospheric conditions. A crescent moon will have tonal variations, not just a half-moon cut-out shape. Similarly, stars have different colours, some appear gold, others look blue.

Silhouette Painting

Light & Shadow / Oil: Learn to Paint Step by Step (How to Draw and Paint Series: Oil)
click to buy from Amazon
Silhouettes of trees, rooftops or lampposts, consist of different darks and outlines. Silhouettes far away will have softer textures and darks than silhouettes that are close by. They will also have different brush marks, some softer than others.

The key to a convincing painting of night is close observation of the subject matter.

Relevant Links to Painting Night Scenes

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

My Painting of Food looks Like Plastic Toys

Painting food in a still life study will present challenges for the artist trying to make them look edible. Instead, a loaf of bread looks more like cardboard, fruit like plastic or a slice of cheese like Plasticine. How can the artist paint food that looks as though it can be plucked from the canvas it and eaten?

Problems with Painting Food

Tackling the problem of inedible looking food in a still life painting means recognising the practices at that lie at heart, which could be any of the following:
  • Pigeonholing food regarding colour and tone, and then illustrating them thus; cheese is pale yellow, tomatoes are deep red, apples are green and fish is bluish-grey.
  • Using the aforementioned colour in a simplified fashion, applying it neat and evenly in a uniform layer to represent perishable goods.
  • Darkening the colour of the food with black or dark grey for shadows.
  • Illustrating detail of the food with harsh lines, such as the blue veins found in stilton or the layers within an onion.
  • Similarly, using heavy lines to outline the food.
  • Using blobs of neat white for highlights.
Still Life Food Painting

Incorporating food into a still life setting can be a challenging yet satisfying experience if the painting is successful, but can be frustrating if the food fails to convey softness or suggest flavour. And this is often where the problem lies. Because food is experienced on many different levels, such as taste, smell and texture, the artist wishing to express all these qualities in paint may feel overwhelmed. The secret is to forget all other senses, but the visual. Observe food simply as a series of shapes, tonal areas and hues. Above all, dispel preconceptions about how food should look. The following tips may help:

Tips on Painting Food

An item of food often contains different colours and tones rather than just one pigment. A ripe tomato will appear red, yet under other lighting conditions may contain violet, orange, earth colours or even black. When illustrating other such shiny orbs such as apples, lemons or eggs, blend away abrupt tonal shifts to rid of dark crescents. Look out for reflected light. This is light bouncing back from a bright surface into the dark side of the object. Reflected light will make the food appear to inhabit space rather than appear flat. Soft blending will also suggest the waxy surface of fruit.

Art Techniques for Still Life

Intricate areas of detail such as the surface of crusty bread or the texture of cheese can be simplified and build over in glazes. This means blurring the vision in order to break down the area into basic tonal areas rather than illustrating every line and wrinkle. Allow imperfections to remain in the brushwork. Once the paint is dry, dragging a little neat paint over selected areas will enhance the crusty texture in a technique known as “scumbling.” Remember that highlights can often be found on raised areas next to dark crevasses or pits within bread or cheese.

The Colour of Food

Taking the time to mix colours accurately will convey the essence of food effectively. White with various amounts of burnt sienna is ideal for mixing the colour of crusty bread, eggshells and onion skins; viridian, a little pthalo blue and lemon yellow, for rich broccoli, Savoy cabbage and spinach. Cadmium red and various amounts of permanent rose can be found in red peppers, tomatoes, ripe apples and cherries.

Painting Fish Textures

The Encyclopedia of Oil Painting Techniques: A Unique Step-by-Step Visual Directory of All the Key Oil-Painting Techniques, Plus an Inspirational Gallery Showing How They Can Be Put into PracticeThe ribbed patterns found on fish often have soft and variegated edges. Softening harsh outlines will suggest the smoothness of fish skin. Silver fish can be captured with white, burnt umber and a little pthalo blue. A little ultramarine and permanent rose can be used for violet hues often found on cold water fish. Applying translucent white pigment is good for soft highlights found on fish scales. Protein foods will often contain sharp highlights, where neat white will do the trick, but look out for highlights of other colour temperatures, such a bluish or creamy whites.

How to Paint Food Effectively

Painting food often entails heightening visual awareness. Look out for different types of outlines: sharp or blurred, which can be found on the skins of meat and poultry. Look out for reflected light, often found on orb-shaped fruit, which will suggest form. Look out for different types of highlights, warm or cool, as found on fish scales, fruit or bread. Look out for different textures, which can be captured by either soft blending or scumbling. Stripping away preconceptions about how food looks and narrowing down the senses to the visual will help with painting food more honestly and therefore suggest flavour and texture by itself.

Relevant Links

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

My Dog Portraits Look Childish

The artist wishing to tackle dog portraiture for the first time may encounter problems with making the dog look convincing. The fur looks too neat or uniform, the eyes almost human, the muzzle area a little cartoonish, culminating in an amateurish dog portrait. What art techniques can the artist use to achieve effective dog oil paintings?

How Not to Paint a Dog’s Head

Painting Dogs with Realism
Rachel Shirley
To make improvements to a dog oil painting, the artist must identify practices at fault which get in the way of achieving professional dog portrait. This might be:
  • Guess-working areas of the dog’s head due to poor photographic reference.
  • Subconsciously making connections between a dog’s features and human features causing human characteristics to leak into the dog portrait.
  • Portraying dog features in an idealised or generalised fashion, as opposed to what the eye actually sees. For example, all dogs’ upper mouths are posterior-shaped, all dogs’ noses look like black buttons and the muzzle area protrudes from the upper face, etc.
  • Using only white to illustrate the dog’s teeth and eyeballs around the irises.
  • Using lines to represent the edges to the dog’s features, such as the nose or ears, where no lines may actually be seen.
  • Using any brown, black beige or white to illustrate the dog’s fur.
  • Using any brown, blue or green to illustrate the dog’s irises and then punctuating each with a black dot for pupils and finishing off with a white highlight.
  • Forgetting to periodically look at the dog photograph when copying the dog portrait.
How to Photograph a Dog’s Face

Good photographic reference is essential to any dog portrait, for no dog will sit still for long (unless when asleep). If possible, take several photos of the dog, in order to select the best one. Natural daylight is always best. Side-lit will bring out contours of the dog’s face. Good lighting will also enable the photographer to use a high shutter speed with high resolution, which is essential for animal photography. Avoid flash photography, as this will make the subject matter appear flat.

Secrets to Painting a Great Dog Portrait

With good photographs, improvements to dog portraits are possible, but the following advice for pet artists will also create a more professional painting of a dog’s head.
  • Transpose the drawing of the dog as accurately as possible, for this will form the foundation of the painting. Use a lightbox or projector if necessary.
  • To prevent preconceptions about how a dog’s face should look like, turn the photograph and the dog painting upside down. This will cause the image to dissolve into unfamiliar shapes, forcing the brain to make sensitive observations about the dog.
  • Look out for subtle colour shifts and tones within the dog fur. Violets, crimsons, ochres and creams can be found in dog hair. Highlights often contain a little blue or mauve, blacks sometimes contain crimsons.
  • Dog’s teeth and eyeballs often contain darks which give them form. Look out for blues, violets and browns as wells as white. Dog’s gums and tongues can be black, brown, mauve or maroon as well as red or pink.
  • Not every division between features require outlines. The contours of a dog’s snout may not always be visible; other delineations may be pale in colour as well as dark.
Oil Painting Technique for Pet Portraits

Great techniques for a dog portrait can be found in glazing and dry brushing. Applying two or three layers of thinned oil paint can be used to improve upon the last layer and to create rich colours, often seen in dog’s fur. The following are also worth consideration.
  • It is easy to edit the background to a dog painting. Using a contrasting colour will make the dog appear more striking. A warm ochre for a dog exhibiting cool colours, such as blue-black or snow-white. Or how about a dark blue background for a toffee-coloured dog? Avoid garish colours that could rob the focal point from the dog.
  • Smooth backgrounds can be achieved by gently stroking a clean soft cloth over the paint layer to rid of unwanted brushmarks. Repeat with the next layer once dry to achieve a high finish.
  • Look out for different-coloured highlights on the dog’s fur such as in the eyeballs, the rims, around the snout, the ears and the lips, which might be eggshell blue, pastel pink or cream.
  • Similarly look out for various darks: blue-blacks, crimson-blacks and violet-blacks, which could be found beneath the chin, ears or in the mouth.
  • Highlights from moisture around the tongue, snout and lips can be suggested by dragging neat white onto selected areas from a fine sable.
Art Materials for Dog Portraiture

Dog Painting--The European Breeds
click to buy from Amazon
Sable brushes are vital for detail such as around the eyes and the hair. Large areas and glazes can be applied with fan brushes or wide hog brushes. Linseed oil can be added to the oil paint to add transparency and flow, ideal for glazing techniques. The artist who wishes to apply glazes quickly can use alkyd oil paints instead, for it dries quickly. I find the following oil colours ideal for dog portraits: titanium white, burnt sienna, burnt umber, French ultramarine, pthalo blue, permanent rose and cadmium red. Reserve black only for the pupils. And of course, look out for other colours in the dog, some of which could be bizarre.

Related Links on Oil Painting

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

Codevilla Gets to the Heart of Understanding Obama?

This is my second post on Codevilla, and I am going to have to make it a point to read more of what he writes because it is becoming clear that The Mackinac Center recently said, Angelo M. Codevilla might be our era's Thomas Paine. Like Paine, Codevilla's works make a lot of things that people intuitively know and feel now clear and boldly stated in plain English. His articles are body-blows to the lies of the world- they give voice and focus to the reality of the situation. He names the unnamed.

His earlier article was about America's Ruling Class, a powerful theme that went a long way towards explaining what is happening in our nation. My post on it was Recommended Read: Codevilla's 'America's Ruling Class', and in it I could do no more than point readers toward his brilliant essay America's Ruling Class -- And the Perils of Revolution that was recently in the American Spectator. If you haven't read it yet, please do so at some point.

Today, via Belmont Club, I came across another of Codevilla's essay's, and it also blew my socks off. Angelo de Codevilla recently reviewed the six accounts of Barack Obama’s life for the Claremont Review of Books, and he ends up with the conclusion that Obama was always something other than what he portrayed himself to be. What that is, in Codevilla’s summary, is this:

In sum, Barack Obama grew intertwined with the narrow, self-referential left side of the American Left. They helped one another believe they had come up the hard way, as underprivileged but brilliant, square-jawed tribunes of the common man. Their common problem, however, is that their agendas are antagonistic to people unlike themselves, and that they cannot keep from showing their contempt for the common folk in whose name they would ride to power.

Since the days of Karl Marx’s First International a century and a half ago, this very human opposition between socialist theory (egalitarianism) and socialist reality (oligarchic oppression) has bedeviled the Left. Marx laid the problem bare in his “Critique of the Gotha Program” (1875). Lenin dealt with it honestly and brutally in What Is to Be Done? (1902)—the foundational document of Communism. By acknowledging that the Communist Party is not the common people’s representative, but rather its “vanguard,” Leninists were comfortable with a party responsible only to itself and to history, a party that openly demanded deference from the humans whose habits it forcibly reshaped. Communism’s undeniable horrors forced the New Left to disassociate itself from What Is to Be Done? and once again to pretend that its socialism was neither oligarchic nor coercive, that somehow it was on the side of ordinary folks. This is a much tougher sell in the 21st century than it was in the 19th. Contemporary socialists try to explain away the common man’s suspicion of them as harbingers of oligarchy, corruption, and coercion by resorting to jargon (e.g., “false consciousness” and “socio-economic anxiety”). But that is ever less convincing. This is why the movement argues so strenuously with itself about whether and how much it should dissimulate its agenda.

Which is one reason why it plays the “race card” and seizes on recruits like Barack Obama: because many black Americans’ ancestors were slaves, must not any black American be, ipso facto, unquestionably, a member and true representative of the downtrodden? And if a skeptic should argue that this or that black man is really a representative of old, white, nasty socialism, of the Corporate State, of upscale parasites who prey on working people, it is easy enough to re-focus the argument on the skeptic’s “racism.” If blacks inclined to play this role did not exist, the Socialist movement would have every incentive to invent them. And in a sense it tries to invent them, through the “black studies” programs that now divert so many young Americans from useful lives into partisan service.

Obama is as close as one could imagine to a made-to-order front man for contemporary, upscale, shy-about-itself, nouveau socialism. From his earliest age, he shaped his dreams about himself to act out a character wholly fictitious, namely a black American from a humble background who rose up out of brilliance and merit, and who yearns to draw all of America’s low-born (plus the rest of mankind) up through the same paths. But he is none of that. Equally imaginary is his vaunted understanding of and sympathy for foreign cultures. A typical multiculturalist, Obama speaks no language other than a peculiar version of English. His native language, loves, and hates are common to some of the most leftist elements of the current American ruling class.

That class knows about America only that it must be changed, and looks at the vast majority of Americans the way carpenters look at warped pieces of lumber. Barack Obama is neither more nor less than its product and agent.
Angelo Codevilla is the author of The Ruling Class: How They Corrupted America and What We Can Do About It and The Character of Nations: How Politics Makes and Breaks Prosperity, Family, and Civility.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

My Baby Portrait Painting Looks like a Small Adult

The novice portrait artist may illustrate subtle contour shifts on a baby’s face as lines or definitive shading, making the baby look more like plastic than soft flesh. Baby’s features are given outlines, such as around the eyes or mouth, resulting in an illustrative rendering of a baby, which may look more adult. How does the artist capture the essence of a baby’ face?

How Not to Paint a Baby Portrait

How to Paint Babies Faces
Rachel Shirley
Baby portraiture is a particularly challenging subject matter, such as the subtle contours and colours of a baby’s skin. But before facing such challenges, faulty practices in painting babies must be addressed, such as the following:
  • Treating all features of the baby’s face, such as eyes, mouth, nostrils and nose as separate entities and outlining each with a line.
  • Expressing in a linear way contour shifts on the baby’s face, such as cheekbones, Cupid’s bow, ball of the chin and temples.
  • Again, using lines to express creases on the baby’s face, such as a furrowed brow, smiling lines or double chin.
  • Mixing white with red or using a tube of “flesh tint” for the skin colour of a baby and then trying to darken the colour with black or dark brown for shadows.
  • Applying any blue, brown or green for the baby’s eyes and using white for the eyeball area in a “painting by numbers” fashion.
  • Rendering the baby’s hair with linear brushstrokes that look the same all over.
Working from memory or poor photographic reference, forcing the brain to fill in the gaps and make assumptions, resulting in a baby painting that looks more like a small version of an adult than a true rendering of a baby.

How Not to Photograph a Child

Working from a poor photograph will not help the artist paint the baby accurately. This may be due to:
  • Flash photography. This will bleach out the baby’s features and any facial contours, resulting in a flat representation of a baby’s face in the painting.
  • Blurred photography. This will make it impossible for the artist to bring out detail, such as the eyelashes, highlights or dimples.
  • A photograph showing baby’s face too small. Again, this will make it impossible for the artist to portray the baby accurately.
For this reason, I often produce my own photographs when commissioned to paint a baby portrait (since baby’s have a habit of fidgeting). The following tips on child portraiture will help.

How to Photograph Babies

The best photograph of a baby is ideally under natural lighting, such as outside or near a window. Avoid backlight, as this will make baby’s face look dark. Sidelight will bring out the contours of the baby’s face. Sunlit conditions may benefit from a fill-in flash or a reflective surface to soften shadows. Use a high resolution setting to capture detail and take several photos rather than just one.

How to Paint a Baby’s Face

The following tips on painting a baby’s portrait will help the artist get to grips with the challenges ahead.
  • Baby’s features have different proportions to an adult, as the features are closer together and cheeks, brow and chin consist of flat planes with few lines. To avoid adult characteristics from creeping in, remember to keep looking at the photograph. If necessary, turn it upside down. Keep standing back from the painting to get an overall impression.
  • A tonal shift in the baby’s skin is better expressed by adding a little complimentary colour (or opposing colour) to the skin colour itself, which in the case of a warm fleshy pink, will be blue or violet. Reserve black for the baby’s pupils.
  • Baby’s faces rarely show lines. It is better to introduce a little white into the mix and illustrate any small creases beneath baby’s eyes or mouth as paler than the surrounding area and then mixing a slightly darker colour and applying it to selected areas to suggest depth.
  • Baby’s eyes will exhibit many variations in colour, such as highlights, reflections and colour shifts. The eyeball is rarely just white but darkens where it disappears into the eye socket.
What Colour is Baby’s Flesh of Different Races?

Look for unlikely pigments in the colour of baby’s skin. This may include violets, blues, brown and even greens. Mix the skin colour of the baby from scratch and avoid using more than three colours for any mix and avoid using tubes of “flesh tint”.

Depending upon the race of the baby, I find the following oil pigments provide a good foundation for child portraiture. These are suggestions only. In real life, some colours may be omitted and other colours may be found.
  1. Caucasian baby: White, cadmium red and burnt sienna for warm colours and highlights; permanent rose, burnt umber and ultramarine for cool colours and shades.
  2. Half cast or olive skinned baby: White, burnt sienna and a little burnt umber for warm colours and highlights; Burnt umber, burnt sienna and pthalo blue for cool colours and shades. A tiny amount of viridian green can sometimes be found in dark skin.
  3. Black baby: White, burnt umber and ultramarine for warm colours and highlights; burnt umber and pthalo blue for cool colours and shades.
Art Techniques for Baby Painting

Da Vinci Black Sable Oil Brush Round 1
click to buy from Amazon
Soft brushes such as sables are a must for child painting. I often complete the baby or toddler portrait in a series of thin glazes. This entails mixing a little linseed oil with the paint and allowing each paint layer to dry before applying the next layer. I often work from mid-tone to dark and light, finishing off with the highlights and the darkest shadows of the baby’s face.

Links Relating to Portrait Painting

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

The Brown Hair on my Portrait Painting Looks Like Tawny Wool

The artist assigned to paint a portrait of someone with brown hair may reach for any brown pigment to represent the follicles in the hope that it will do, the result being the hair looks flat, dull and more like wool than fine strands. How can the artist paint brown hair realistically?

How to Paint Brown Hair on Portraits

Painting Brown Hair
Rachel Shirley
The artist may reflect upon what went wrong when painting hair in order to make changes to how the oil painting was completed. Any of the following painting practices could be at fault:
  • Making blanket assumptions about the colour of brown hair, using any tube of oil paint labelled “brown” to represent anything from brunette to auburn.
  • Illustrating every strand of the hair in a linear fashion with a fine sable, resulting in a synthetic appearance that resembles a wig rather than real hair.
  • Allowing harsh dividing lines to remain between tonal areas, making the hair appear solid or plastic rather than divisible strands.
  • Mixing the brown colour with white to represent highlights, or black to darken it, resulting in dirty grey colours.
  • Treating the hair area as a separate entity to the rest of the face, by omitting to illustrate how the hair casts shadows over the brow and cheeks, resulting in a cut out appearance to the brown hair.
Tips on Painting Brunette

The observant artist will notice that brown hair is a mere blanket label for a diversity earthen colours, including brunette, ochre, auburn, coffee, toffee, bronze tan, chocolate and russet that require different colour mixes to achieve. With this in mind, the following remedies may help the artist paint brown hair realistically.
  • Avoid using generic brown paint to represent the whole head of hair. The brown colour will vary between individuals and even between strands.
  • The key to suggesting the soft texture of hair is through blending. Look out for harsh divisions in tonal areas that could draw the eye. Use a soft sable for achieving smooth gradations.
  • Highlights are not merely white, but other colours. Some brunettes exhibit blue highlights, others show pinks, violets and even red.
  • Avoid using black to darken brown hair. Warm brown hair can be darkened with a little pthalo blue and burnt umber; cool brown hair can be darkened with a little ultramarine and permanent rose.
  • There is no need to draw every strand of the hair. It is better to blend the colours of hair and to suggest detail with a fine sable on selected areas of the hair, such as highlights and stray strands.
Pay special attention to the outline of the hair, particularly strands that fall over the face or catch the light.

Illustrating local shadows over the face can be effective at creating an almost photographic representation of hair and making it look as though it belongs to the subject.

Backlit hair will create bright russet colours, pinks, golds and bronzes, with tones similar to bright translucent autumn leaves. Take advantage of these opportunities to create a striking portrait.

Colour Mixes for Shades of Brown Hair

Color Mixing Recipes for Portraits: More than 500 Color Combinations for skin, eyes, lips & hair
click to buy from Amazon
Lots of browns and earth colours are not needed for every shade of brown. I use burnt sienna, burnt umber, ultramarine, pthalo blue, permanent rose, cadmium red and titanium white for all my brown hair paintings.

The portrait artist may find the following pigment mixtures helpful when trying to capture a particular colour mix for brown hair. The pigments are suggestion only, as in real life, more colours will be seen in highlights, reflections and darks. Varying amounts of white will be required in each case to express paler tones.

Ash brown hair: burnt umber, a little pthalo blue with white.
Auburn hair: burnt sienna, permanent rose and ultramarine.
Russet hair: burnt umber, cadmium red and a little ultramarine.
Toffee hair: burnt umber, cadmium red and a little ultramarine.
Dark coffee hair: burnt umber, pthalo blue and permanent rose.
Almost black brown hair: burnt umber, pthalo blue and a little permanent rose.

Oil Painting Techniques for Painting Hair

Glazing and dry brushing are great for suggesting realistic hair. Such painting techniques are explored on my articles via the links below and also via the links on this site navigation.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

The Skin Tones in My Portraits Look Wrong

Capturing flesh colours in portraiture is a common problem. The colour of skin looks artificial or too uniform. The subtleties in flesh colours may be elusive to the painter. Facial contours are illustrated as lines, making the portrait look harsh and amateurish. Portrait painting is often viewed as the artist’s last frontier, the fear of producing an unsatisfactory portrait faring a bigger deal than say, an unsatisfactory landscape painting.

Common Problems with Portrait Painting


The following practices are often the culprit of a portrait painting with unconvincing flesh colours:
  • Including a painting pigment labelled “flesh tint” or “flesh hue” Within the artist’s palette, creating an idealistic impression of how skin should look.
  • Using black or a dirty earth colour to darken the flesh colour
  • Painting with presumptions about how skin should look, for example by mixing red with white
  • Using delicate tones throughout, resulting in a bleached out or flat portrait
  • Forgetting to observe the subject matter whilst painting, falling into the habit of simply finishing the painting
  • Painting lines to delineate facial features, for instance, wrinkles or cheekbones
Tips on How to Improve Portrait Painting

The following simple measures will help the portrait artist with improving the practice of portrait painting.
  • Skin colours contains the most unexpected hues, such as violets, crimsons and even greens, which can be seen on reflections from neighbouring objects
  • Similarly, skin often contain deep tones, some of which may appear almost black. Adding a cool colour, such as blue or violet, will darken the skin colour more effectively than black
  • Dispense with black altogether except for painting pupils. Similarly, dispense with “flesh tint” or such hues that merely reinforce the idea that skin “should” be beige or pink.
  • Mix the flesh colour from scratch by using no more than three colours and white
  • Prior to painting the portrait, apply a neutral coloured under-wash of thin acrylic paint to kill the off-putting white of the painting surface
  • Paint the skin colours prior to the features, such as eyes and lips, as these colours could contaminate the delicate skin colours
  • Try painting an isolated feature such as the nose or lips, to get to grips with flesh colours before having a go at the entire portrait
  • Complete the portrait in several stages. Don’t try to rush it at the end when tired, or this will ruin the painting
  • Accept that the portrait will make little sense until it is completed
  • Going over the portrait painting two or three times is sometimes necessary to make tonal and colour adjustments
Painting Children and Older People

All portraiture should have the same approach. Facial features often consist of subtle changes in tone and colour, which beginners perceive to be linear. Children’s faces seldom have lines, only subtle shadows and shifts in hue. Similarly, wrinkles are not simply lines, but are subtle marks. Half closing the eyes and standing back from the portrait will help the artist garner the most important aspects of a portrait, as opposed to sitting too close to the photograph and illustrating each eyelash.

Essential Art Materials for Painting Portraits

Color Mixing Recipes for Portraits: More than 500 Color Combinations for skin, eyes, lips & hair
click to buy from Amazon
Good quality sables, such as Kolinsky, available from Daler Rowney or Winsor Newton are crucial for portraiture. Round brushes sizes 3, 6 and 9 should suffice. Burnt sienna and white makes a good base colour for skin. The inclusion of ultramarine will take the creaminess off and result in a cooler skin colour. Permanent rose, pthalo blue and burnt umber in small amounts, are also useful pigments to include in the skin palette. Introducing a little colour, as opposed to too much will result in the desired mix. Lastly, linseed oil will take smooth out any unwanted brush marks from the painting.

Links Relating to Portrait Painting

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

The Colours in my Sunset Paintings Look Dirty

The inspiration to paint a beautiful sunset could be quashed when muddy colours seem to come from nowhere and bright colours look garish. An oil painting intended to portray intense colours of a dramatic sunset looks more like a post apocalyptic scene. How can the artist recreate the drama of a sunset in painting?

Common Problems when Painting a Sunset

Clean Colours for Sunsets
Rachel Shirley
Sunset skies often set up contradicting dilemmas in the mind due to extreme tonal shifts and saturated colours that sunsets often feature. Before the artist can improve on sunset painting, the causes need to be pinpointed, which could be any of the following:
  • Trying to make a sunset look dazzling by using exclusively bright colours in a painting, such as pinks, mauves and oranges, resulting in a candyfloss and childlike portrayal of dusk.
  • Placing dark colours of sunset prior to the pales, causing contamination of the bright colours by the neighbouring dark colours.
  • Allowing two contrasting colours, such as violet and yellow or blue and orange, to overlap on the painting, resulting in muddy streaks across the sky.
  • Making generalisations about how sunsets should look, such as the gradations of colours when receding from the sun. This is often portrayed as yellow to orange, orange to red, red to mauve and mauve to blue.
  • Using black to darken a bright colour, such as red or orange.
  • Miscalculating the tonal values of a sunset scene in favour of the colour by making the assumption that blue is always darker than red, or yellow is always paler than mauve.
  • Portraying the landscape at the horizon as a cardboard cut-out black silhouette.
Secrets to Painting Sunsets

Dramatic sunsets often contain bizarre colours and tones. In such cases, it is important to believe what the eye sees, and to resist toning down the colours, or to try to make the colours make sense. The following practices will help when painting sunsets.

Even the brightest sunsets contain sullen colours and neutrals. Without this contrast, the sunset would not appear so bright. Furthermore, apparently bright colours often consist of dark mixes. A blood red sky can be achieved by a mixture of permanent rose and burnt umber; bright orange often contains a hint of violet. Keen observation of tiny colour shifts in sunsets is the key to making it look convincing.

Tonal Values of Sunsets

Sunsets are often more about tone than colour. Half closing the eyes will break down the scene into basic tonal areas. Bear in mind that any colour can be darker or paler than another: yellow can be darker than blue; violet can be paler than red.

It is worth remembering that sunsets often invert the tonal values of a daytime sky, where clouds generally appear paler than the blue sky. At dusk, clouds will appear almost inky black against a bright sunset.

Apply the pale or bright colour mixes prior to the darks. This will prevent colour contamination of the bright colours.

Bin the black. Use a contrasting colour when darkening a colour. Red, for instance, can be darkened by the introduction of a little blue; yellow can be darkened with a little violet.

Colours of Clouds at Sunset

Look out for textures in sunset skies, such as the oblique sunlight skimming across the undersides of altocumulus or altostratus. Look for different types of outlines in clouds, where some will be softer than others. Cirrus, for instance, has feathery outlines; distant anvil clouds often have defined outlines.

Art Techniques for Painting Sunsets

Oil: Sunsets (HT101)
click to buy from Amazon
Smooth areas of a sunset sky, such as the night sky between the clouds can be recreated by glazing the oil paint. This entails thinning the paint into a smooth even layer with a little linseed oil. Textures in the clouds can be recreated with thicker paint or impasto which will contrast with the smooth areas. A diversity of outlines can be created by blending misty clouds with a clean soft sable, and defining sharp clouds with a fine brush.

Look for diverse darks on the foreground landscape. Some will appear warmer than others. Some may have violets, others, smoky blue. Again, nearer objects will often have sharper edges than distant objects. This will help give the silhouetted landscape depth.

Links on Painting Sunsets

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

My Painting of Silver Objects looks Like Lead

A painting featuring silverware may lack the lustre of actual silver. Silver heirlooms look like costume jewellery; a silver shield resembles a plastic toy. How can the artist capture the true essence of silver in oil paint?

Mistakes in Painting Silver, Platinum and Aluminum Objects

How to Paint Silver Objects
Before making improvements to still life featuring silverware, practices at fault must be identified which also applies to painting other pale metals, such as aluminum or platinum:

  • Using a tube of premixed grey for all the silverware, such as Paynes Grey or Davy’s grey, resulting in a lead effect rather than the brilliance of silver.
  • Mixing black and white for the greys featured in the silver objects.
  • Darkening colours within the silverware with black.
  • Illustrating the silver objects as having flat areas without subtle tonal shifts.
  • Insensitivity to colour temperatures within neutrals, resulting in a painting that lacks depth.
  • Perceiving highlights in silverware as white shapes, resulting in the appearance of white bits of paper stuck on the objects.
  • Using silver metallic paint designed for gilding for the oil painting in the hope it will emulate the lustre of silver or a similar shiny metal.
The problem with the last point is that the silver metallic paint will appear a dull grey if the painting is positioned where no reflections occur.

Art Techniques for Painting Silver

Differentiating between silver and grey is a common pitfall when it comes to painting silver objects. Both silver and grey do indeed contain similar colours, as both contain greys and monotones. The difference lies in the colour mixes used for the neutrals and the tonal contrasts.

What Colour is Silver?

In order to capture silver effects in oil paint, the artist must look for other colours other than grey within. This means looking for colour temperatures in neutrals, as some will be warmer than others. This is why I never use just black and white or a pre-mixed grey pigment to express silver objects. In fact, silver can contain definite hues, including violets, crimsons and earth colours. As a guide, the following colour mixtures can be used to render silver objects in a still life. Listed from the largest by proportion first:
  • Warm highlights: white, a little burnt sienna and ultramarine.
  • Cool highlights: white and a little pthalo blue.
  • Warm neutrals: ultramarine, white and a little burnt sienna.
  • Cool neutrals: white, pthalo blue and a little burnt umber.
  • Warm darks: burnt sienna and ultramarine. Permanent rose can be introduced for depth.
  • Cool darks: pthalo blue and burnt umber.
Art Techniques to for Painting Silver Jewellery and Ornaments

To capture smooth metallic effects in silver objects such as tankards and dishes, apply the oil paint via a soft sable and brush out tonal and chromatic divisions. Glazing is a great technique for achieving a high finish. Apply the first layer of paint opaquely, aiming for reasonable accuracy in the silver object(s) depicted. Don’t worry if imperfections remain but smooth out brushmarks. Once this first layer of paint is dry, apply another layer of paint as a translucent layer with the aim of perfecting the first layer, smoothing out tonal gradations and adding depth to colours. If necessary, apply a third glaze once this second layer is dry.

Glazing is great for attaining sharply defined edges to reflections and highlights. But you can also use impasto effects on the highlights to add punch to the appearance of the silver object.

Painting Technique for Detail in Silver Jewellery

Intricate detail which is often apparent in silver artifacts such as jewellery or embossed surfaces can be emulated by applying a base colour beneath the detailed area. This base colour should be a ‘mean’ colour which might be a pale neutral or blue-grey. Once this area is dry, ‘illustrate’ the detail on top, beginning with the highlights to prevent colour contamination from a neighbouring dark colour. Work into the mid-tones with a progressively darker colour mix. Finish off with the dark areas. Use a fine sable throughout. Remember to keep looking for colour temperatures within neutrals, some of which might contain a little violet, others, blue. Reflections from neighbouring bright objects will provide focal points to compete with highlights.

How to Paint Silver Objects

Capturing the lustre of silver in oil paint means looking not only for bright highlights, but also subtle hues within neutrals, some of which will be warmer than others. This means putting away premixed grey tubes of paint and black. I used ultramarine, burnt sienna, burnt umber and pthalo blue, as well as white. Glazing is great for achieving a high finish for smooth metallic effects, although impasto techniques can be used for bright highlights and bright reflections.

Painting Techniques for Still Life Art

How to Make Gold look Like Gold
How to Paint Glass
Glazing Technique with Oils
I can't paint reflections in my still life
How to Paint Tomatoes

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

How do I Make Gold Look like Gold with Oil Paint?

The artist trying to convey metallic effects with oil paint may be disappointed if brass ornaments or gold jewellery resembles dollops of mustard in the still life painting. How can the artist get gold effects in painting?

Problems with Painting Gold Jewellery

How to Paint Gold
A still life setting featuring gold objects such as jewellery may appear tarnished or plastic-like due to misconceptions about the colour gold, causing the artist to use a lot of yellow, orange or ochres. Such idealistic concepts about the colour gold may be indicative by the following notions and practices.
  • Having the subconscious idea that all gold is basically yellow, yellow-orange or ochre.
  • Reaching for any yellow pigment at hand for mixing gold colours.
  • Darkening yellow with black or dark brown to achieve dark tones in gold.
  • Mixing white with yellow to represent highlights in gold.
  • Giving sharp outlines to gold objects with the aim of making them stand out, resulting in a cutout appearance.
  • Using bright colours throughout the gold object such as yellows, oranges and ochres with the aim of conveying brilliance.
  • Going overboard with white highlights to imply sheen.
  • Applying gold metallic paint designed for gilt onto the gold objects in the still life.
Oil Painting Techniques for Gold

In order to make gold look authentic, the artist must forget about gold’s ‘local’ colour (yellow-brown), and instead think about how gold actually looks. A bright-coloured object does not necessary exclusively comprise bright colours. In fact, the secret to recreating the brilliance of gold lies in juxtaposing bright colours against sombre hues. Gold can contain such dour colours as dark green, dark grey or midnight blue.

Try not to get visually railroaded by bright colours, particularly yellow. Seek out neutrals and sombre colours within the gold objects. Highlights in gold seldom contain yellow, but cool pales such as powder-blue, eggshell or light grey. Only the smallest amounts of neat white (or yellow, if it can be perceived) are often needed to illustrate highlights in gold.

Look for opposing colours in the gold object; in the case of yellow or orange this will be any colour in the blue spectrum; violet, azure or indigo. Similarly, look for cool neutrals.

Look for unlikely colours in the gold object. I have often seen olive green, mauve and indigo in gold objects. Under certain lighting conditions, gold objects may exhibit no yellow, orange or ochre whatsoever. Believe what the eye sees as opposed to reaching for yellow, orange or ochre by automation.

Mixing Gold Colours in Oils

Prior to embarking upon a painting featuring bright objects such as gold, apply a neutral-coloured underglaze onto the art surface. Applying a bright or light colour straight onto a white art surface will make the colour appear darker than it actually is.

Before applying the bright colours or highlights, look for sombre colours in gold. This means neutrals, greys blue-greys and blue-greens. Similarly, look for cool colours within the highlights.

Look for definite hues in darks, such as blues and violets. Don’t darken the colour of gold by a mixture of yellow/orange and black, as this will result in dirty colours.

Don’t overdo it with bright colours, for yellows, oranges and ochres will often exhibit a modest ratio of the gold object. Even the smallest flecks of bright colours and highlights will provide great focal points for the gold object.

Apply the highlights and the brightest colours last. I will apply the paint thickly in these areas to make the highlights stand out from the art surface.

What Colour is Gold?

The following colour mixtures are ideal for capturing gold jewellery, ornaments or artifacts, although other colours can be seen. Remember to keep looking.
  • Warm highlights: white with a dab of burnt sienna. A smidgen of cadmium yellow can be added if a yellowish hue is apparent.
  • Cool highlights: white with a dab of ultramarine and burnt umber.
  • Warm mid-tones: burnt sienna, a little cadmium red and white.
  • Cool mid-tones: burnt umber, a little ultramarine and white.
  • Warm darks: burnt sienna and ultramarine. A little cadmium yellow can be added for an additional yellow cast.
  • Cool darks: Burnt umber and ultramarine. For extra depth, a little pthalo blue and permanent rose can be added.
Art Techniques for Painting Gold

Glazing is an ideal art technique for achieving smooth, metallic effects in oil paint. Glazing entails applying a thin, translucent layer of oil paint and working on top once the glaze is dry. Soft sable brushes and any oil medium, such as linseed oil or Liquin can be used to thin the paint into glazes. Once mixed into a translucent consistency, apply the paint for an effect like tinted glass.

Strategic use of impasto can also be used to make highlights stand out literally from the art surface. I do this by applying white neat from the tube.

Working dark to light will increase visual awareness of tones and bright colours found in gold. Sketch the composition via chalk onto a black art surface which has been overlaid with black acrylic paint (or a very dark colour). Apply the dark tones first off, working to the mid-tones, then to the light tones and finally the highlights.

How to Paint Gold Objects in Oils

Rendering gold objects convincingly entails discarding preconceived notions that gold contains lots of yellow and plenty of highlights. Using gold paint will only give a dirty yellow appearance if there are not reflections. Gold in fact can contain lots of sombre hues, even in highlights, which can be blues, greys, ochres and violets. Use bright colours sparingly and don’t overdo the highlights. Dong so will only make the gold object look more like costume jewellery. The secret is to pay extra notice to neutrals and sombre hues before the bright colours and highlights.

Tips on Oil Painting Techniques

How to make glass look like glass
My silver objects look like lead
Why are my colour mixes dirty?
All about oil painting mediums
Glechniques in oils
Demonstration on painting toys

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS

The Oil Painting of My White Pet Looks like a Snowball

Painting white fur may compel an almost knee-jerk reaction of titanium white overkill on a portrait of a dog, cat or horse. The result may turn out to be a two dimensional cut out impression of the animal. How can the pet portrait artist paint white fur.

Problems with Painting White Animal Hair

  
Painting Horses with White Fur
Rachel Shirley
The idea of using dark pigments or those of a definite hue goes against what the brain knows about the fur, which is white. This may lead the artist into faulty practices, which could be any of the following:
  • Exclusively using white paint or very pale colour mixes to illustrate pale fur, resulting in a washed-out pet painting.
  • Using poor photographic reference of the pet, particularly flash photography that results in a bleached-out image.
  • Darkening pale fur with black oil paint for shadows, resulting in dirty dead greys.
  • Illustrating contours as dark lines, creating an illustrated effect that does not convey the true softness or texture of the animal.
  • Illustrating each hair as a white linear brush mark of equal thickness and tone, resulting in a uniform and artificial appearance to the fur.
Tips on Animal Photography

Good photographic reference is crucial (for pets have a habit of moving about unless asleep). This is especially important for a pet of one colour, such as black or white. Natural daylight is best. Only use flash photography as a fill-in to soften harsh shadows. Avoid taking the photo into the light. I find side-lit effective at capturing the contours of a dog’s face, for example, which will reveal its character. Get as close up as possible and take several photos to increase the chances of obtaining one that really captures the essence of the pet.

What Pigments Should I Use for White Fur?

The artist must override the fact that a pet is white before trying to paint white fur. The following tips may help achieve a convincing portrayal of a fluffy white pet.

Depending upon the light conditions white fur can harbour many hues such as cream, eggshell, china blue, violet beige, mauve, smoky grey, indigo and blue. Just a few oil pigments are required for white fur, which are:
  • Titanium white
  • Burnt sienna
  • Burnt umber
  • Permanent rose
  • French ultramarine
  • Pthalo blue
I ban black for it deadens neutral colours, but delicate tints can be achieved with the addition of the following colours with white.

White and burnt sienna creates rich creams for warm highlights; white with a dab of pthalo blue produces arctic white; white with ultramarine and a little burnt umber creates dark indigos for cool shadows; white with a dash of pthalo blue and permanent rose creates delicate mauves, and with a little burnt umber creates rich neutrals.

Tips on Painting White Fur

Never paint a white object onto a white painting surface or its tones will be difficult to judge. Apply a mid-toned imprimatura onto the painting surface first. I would recommend a thin wash of neutral-coloured acrylic paint. This could be a mixture of blue and brown or grey. Once dry, I transfer the drawing onto the surface using a chalk pencil.

Begin with the mid tones and work outwards to the darks and pales. Take care not to contaminate pales from a neighbouring dark colour. View the areas of light and dark as abstract shapes rather than part of an animal. Turn the photo upside down to retain the abstract appearance.

Techniques for Painting Soft Fur

Glazing is a great painting technique for emulating rich soft fur. Glazing entails applying oil paint in translucent layers. Soft sables are essential; Kolinsky sable size 1 for detail, 3 for blending and 6 for smoothing larger areas. Block in large areas of tone and colour first. Don’t worry about detail at this point for the next glaze can be used to smooth imperfections.

Soft Blending for Detail on Fur

The other secret to painting soft white fur is blending. With a soft clean brush, knit together harsh colour divisions. Keep wiping the brush on a rag to avoid the paint from building up (avoid swilling it in spirits or the paint will be too runny). Using paint neat can be controlled more easily and when dragged over the painting surface with a thin brush, will appear almost like a pastel pencil, great for soft effects such as fur. Remember to move the brush in the direction of the fur’s growth.

Painting Realistic Fur

Da Vinci Black Sable Oil Brush Round 1
click to buy from Amazon
It is not necessary to apply equal detail all over the fur or it will look flat. Apply detail to focal points only, such as the highlights, the nose or fur around the eyes. Suggesting flyaway fur will create more realism. Dragging thin paint as described earlier to suggest hair around the ears or tail will make the pet look more stroke-able. Finally, not all fur has the same appearance. Some will look finer than others, and again, will follow different growth patterns.

External Links Relating to Painting Animals

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS